SKU: TH1568
The PC817 4-Channel Optocoupler Voltage Isolation Module is a reliable board for isolating digital signals between high-voltage and low-voltage systems. Featuring four PC817 optocouplers, this module protects sensitive microcontrollers, sensors, or PLCs from electrical surges, noise, and voltage spikes.
Sold Out!
We will notify you when this item is back in stock. Please enter your email or mobile number.
The PC817 4-Channel Optocoupler Voltage Isolation Module is a reliable board for isolating digital signals between high-voltage and low-voltage systems. Featuring four PC817 optocouplers, this module protects sensitive microcontrollers, sensors, or PLCs from electrical surges, noise, and voltage spikes.
A built-in jumper allows easy switching between common ground mode (for simplified setups) and full isolation mode, making it highly flexible for a wide range of applications.
Technical details for PC817 4 Channel Optocoupler Voltage Isolation Board
| Specification | Details |
|---|---|
| Optocoupler IC | PC817 (4 channels) |
| Input Voltage Range | 3.6V to 24V DC (with onboard current-limiting resistors) |
| Output Voltage | 3.6V to 30V |
| Output Type | Open-collector (pull-up resistors required on output side) |
| Jumper Function | Connects or isolates input and output ground:
|
| LED Indicators | Yes (1 per channel to show input status) |
| Isolation Voltage | Up to 5kV (internal PC817 rating) |
| Board Dimensions | Approx. 50mm x 30mm x 18mm |
| Mounting | Pre-drilled holes for easy mounting |
| Applications | Microcontroller interfacing, PLC systems, industrial automation, sensor protection |
| Pin Label | Input or Output | Description |
|---|---|---|
| IN1, IN2, IN3, IN4 | Input Side | Signal input pins for each channel (connect to sensor or microcontroller GPIO) |
| GND (IN) | Input Side | Ground for input signals (isolated from output side if jumper is removed) |
| OUT1, OUT2, OUT3, OUT4 | Output Side | Open-collector output pins for each channel (connect to receiving circuit with pull-up resistor) |
| GND (OUT) | Output Side | Ground for output signals (connects to output system ground) |
| VCC | Output Side | Optional VCC pin for powering output circuit or pull-up voltage (typically 3.3V or 5V) |
| Jumper | Between Input and Output Grounds | Connects input and output grounds when inserted (for non-isolated mode). Remove for full isolation. |
Average rating
Based on 0 reviews
No reviews match this filter yet.
